A320 飛行手冊
A320 飛行手冊
✅ A320neo V2 – Full Startup to Takeoff Checklist
🔌 Cold & Dark Startup
- BAT 1 & BAT 2 → ON
- EXT PWR → ON (if available)
- Crew Supply → ON
- NAV & LOGO Lights → ON (as needed)
- ADIRS (3 knobs) → NAV (Align IRS)
- Set Brightness for ECAM & MCDU
🧭 MCDU Initialization & Flight PlanINIT A page → Enter FROM/TO ICAO
- Flight number / Cost Index / CRZ FL
- F-PLN page → Insert SID, route, STAR
- INIT B page → Set ZFW, Block Fuel
- PERF TO page → Set V1 / VR / V2
- Set FLEX TEMP or TOGA
- Set Flaps configuration (usually Flaps 1+F)
🔧 Overhead & Systems Setup
- Fuel Pumps → ON
- APU Master → ON
- APU Start → Wait for APU AVAIL
- APU Bleed → ON
- Seatbelt & No Smoking Signs → ON
- EFIS Baro/STD → Set QNH
- Autobrake → MAX
- Transponder → Code + Set to AUTO
🛻 Pushback & Engine Start
- Beacon Light → ON
- Call Pushback Tug
- ENG MODE Selector → IGN/START
- Start ENG 2 → Monitor N2, fuel flow, EGT
- Start ENG 1 → Monitor
- ENG MODE Selector → NORM
- APU Bleed → OFF (if engines stabilized)
- APU Master → OFF (optional)
🛫 Before Taxi
- Check FLAPS → Set as per PERF (1+F)
- SPOILERS → ARM
- PITCH TRIM → Set (e.g., UP 0.8)
- Rudder Trim → NEUTRAL
- ECAM Status → Check
- ND Range & Mode → Set
- TAXI Light → ON
- Parking Brake → RELEASE
✈️ Taxi Checklist
- Check Brakes & Nosewheel Steering
- Perform flight control check
- Check flight instruments (PFD, ND)
- Set TO CONFIG button → “TO CONFIG NORMAL”
- Contact ATC for clearance
🛬 Before Takeoff (Final Items)
- Takeoff RWY Confirmed & Aligned
- ECAM → Takeoff Config NORMAL
- RWY Turnoff & Strobe Lights → ON
- Landing Lights → ON
- TCAS → TA/RA
🚀 Takeoff Roll
- Thrust Levers → FLEX or TOGA detent
- Monitor FMA: “SRS | RWY | CLB”
- At V1 → Continue
- At VR → Rotate to ~15° pitch
- Positive Climb → Gear UP
- At Acceleration Altitude → Lower pitch, retract flaps
- Set CLB detent
- AP1 → ON (if desired)